E800 MS
Quick start guide
ENHANCE
|
TECHNOLOGY
Gently “press” tray handle to insert HDD
1
2
3
4
5
6
7
8
Disk Installation
If your system was purchased with capacity, please skip this section and
immediately go to next section. If your system was purchased without disks,
install each disk into the provided disk trays and fasten using the supplied
hdd screws. Do not use any other mounting screws other than the ones provided
with your system. System or disk damage may occur if using non-approved
mounting hardware.
!
!
Hard Disk
Disk tray - Bottom view
Disk Tray
!
6
!
Insert Disk Module
After fastening each disk, insert the disk trays in the open disk bay on your
system. For added securityvnhfgd, your system is equipped with locking
disk bays to prevent accidental or malicious disk removal.
5
7
HBA/RAID Controller Installation
Your E800 MS features a RAID-ready JBOD architecture. This provides
the best support for a wide range of host bus adapters & PCI RAID controllers.
Always follow your HBA/RAID controller’s installation procedure to ensure
proper operation.
!
WARNING: Allow a few minutes for the internal
computer compenents to cool down before
opening your computer system.
1. Touch the metal PCI slot covers on the back
of your computer to discharge any static electricity.
2. Unplug ALL cables from your computer, and remove
the side access panel according to your system type.
3.
and place it on a clean, safe surface.
NOTE:
8
Please follow your HBA/RAID controller’s driver installation notes to ensure
HBA/RAID Controller Installation - Cont’d
1. Remove the PCI slot cover plate from an available
PCI slot. Consult your HBA or video capture card
for recommended slot postions.
2. Install & secure your PCI controller card into the slot
version users please install the PCIe card into the slot #4. For
Mac 2009 and 2010 version users please install the PCIe card
into the slot #2
3. Close and replace the system panel.
Port access opening
PCI slot
Reinstall the screw
to secure the card
in place.
WARNING: To minimize the chance of electrical
shock, always follow proper saftey rules when
working with electrical components.
(6 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels